Hej i Kylan!
En av de Amerikanska hembryggar-gurus som skrivit en tegelsten i ämnet
heter
John J Palmer.
Hans bok ligger ute på webben:
http://www.howtobrew.com
John Palmer har en civil karrär som.........metallurg!!
Sammanfattningsvis så gäller följande enl J.P:
Ärg och oxid skall bort oavsett färg, grön svart brun osv.
5% vinäger gärna tillsammans med värme och mekanisk borstning
brukar funka, börja med mjuk borste för att vid behov "tagga" upp.
Bif några amerikanska citat:
Cleaning Copper
For routine cleaning of copper and other metals, percarbonate-based cleaners like PBW are the best choice.
For heavily oxidized conditions, acetic acid is very effective, especially when hot. Acetic acid is available in grocery stores as white distilled vinegar at a standard concentration of 5% acetic acid by volume. It is important to use only white distilled vinegar as opposed to cider or wine vinegar because these other types may contain live acetobacteria cultures, which are the last thing you want in your beer.
Brewers who use immersion wort chillers are always surprised how bright and shiny the chiller is the first time it comes out of the wort. If the chiller wasn't bright and shiny when it went into the wort, guess where the grime and oxides ended up? Yep, in your beer. The oxides of copper are more readily dissolved by the mildly acidic wort than is the copper itself. By cleaning copper tubing with acetic acid once before the first use and rinsing with water immediately after each use, the copper will remain clean with no oxide or wort deposits that could harbor bacteria.
Cleaning copper with vinegar should only occasionally be necessary.
The best sanitizer for counterflow wort chillers is Star San'. It is acidic and can be used to clean copper as well as sanitize. Star San can be left in the chiller overnight to soak-clean the inside.
Cleaning and sanitizing copper with bleach solutions is not recommended. The chlorine and hypochlorites in bleach cause oxidation and blackening of copper and brass. If the oxides come in contact with the mildly acidic wort, the oxides will quickly dissolve, possibly exposing yeast to unhealthy levels of copper during fermentation.
Appendix B - Brewing Metallurgy
For routine cleaning of copper and other metals, percarbonate-based cleaners like PBW are the best choice. For heavily oxidized conditions, acetic acid is very effective, especially when hot. Acetic acid is available in grocery stores as white distilled vinegar at a standard concentration of 5% acetic acid by volume.
Brewers who use immersion wort chillers are always surprised how bright and shiny the chiller is the first time it comes out of the wort. If the chiller wasn't bright and shiny when it went into the wort, guess where the grime and oxides ended up? Yep, in your beer. The oxides of copper are more readily dissolved by the mildly acidic wort than is the copper itself. By cleaning copper tubing with acetic acid once before the first use and rinsing with water immediately after each use, the copper will remain clean with no oxide or wort deposits that could harbor bacteria. Cleaning copper with vinegar should only occasionally be necessary.
You do not need to clean copper shiny-bright after every use. With time, the copper should take on a dull copper color, not black, not green or blue, just dull, like an old penny. This copper oxide is relatively inert to wort and will mimimize copper dissolving into the wort, more so than shiny-bright copper.
The best sanitizer for counterflow wort chillers is Star San. It is acidic and can be used to clean copper as well as sanitize. Sanitizing with Star San only takes minutes and should not be left in the chiller more than an hour, because it will start dissolving the copper.
Cleaning and sanitizing copper with bleach solutions is not recommended. The chlorine and hypochlorites in bleach cause oxidation and blackening of copper and brass. If the oxides come in contact with the mildly acidic wort, the oxides will quickly dissolve, possibly exposing yeast to unhealthy levels of copper during fermentation.
Cleaning Brass
Some brewers use brass fittings in conjunction with their wort chillers or other brewing equipment and are concerned about the lead that is present in brass alloys. A solution of two parts white vinegar to one part hydrogen peroxide (common 3% solution) will remove tarnish and surface lead from brass parts when they are soaked for 5 minutes or less at room temperature. The brass will turn a buttery yellow color as it is cleaned. If the solution starts to turn green and the brass darkens, then the parts have been soaking too long and the copper in the brass is beginning to dissolve, exposing more lead. The solution has become contaminated and the part should be re-cleaned in a fresh solution.